2-14 Advanced copy functions
One-sided copying of a duplex document (2
1 sided)
NOTE
Use the automatic document feeder for copying. The document glass cannot be used.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Copy Ready” screen
is displayed.
3
Press [DuplexCopy].
If [DuplexCopy] is not displayed, press [Advanced] and then select [DuplexCopy].
4
Select [2 1 sided].
Select [OFF] to deselect the setting.
5
Select [Short Edge] or [Long Edge], and press [Enter].
6
Press <Start>.
To Next Page
Loading...
Need help?
General
