Murrplastik mp-IM1 - ACS Gold Studio Software Settings

29
Save the settings
finally.
Please note that the offset values may vary slightly depending
on the device.
11 Settings in the ACS Gold Studio software
In the ACS Gold Studio software the mp-IM1 is added and the
calibration points are entered.
The settings must be made separately for each Windows® user.
Start the ACS software,
do not open a project
and click [Settings] -
[Output Device Setup].
If the mp-IM1
is not preselected
already in the upper
drop-down menu
of the Tags output
section (red frame),
open this drop-down
menu and choose
the corresponding
mp-IM1.