EasyManua.ls Logo

Murrplastik mp-IM1 - Ink Cartridge Handling

Murrplastik mp-IM1
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Always switch off the device using the power button next to the
display. If you press this button, the display goes off. Only when the
display is gone off may the mains plug be pulled out or the power
supply be disconnected.
3.5 Ink cartridge handling
Always store the ink cartridge out of the reach of children. The
cartridge content is not edible.
If you get ink on your skin, clean it off using soap and water. If ink
should get into your eyes, wash it out immediately with plenty of
water.
Shake the new ink cartridge four to five times before opening the
package.
After opening the packaging, the ink cartridge must not be shaken,
since otherwise ink may leak out.
Use the ink cartridge before the date printed on the packaging.
Install the ink cartridge immediately after opening the package. If the
ink cartridge remains unpacked for an extended period of time before
use, normal printing may not be possible. No replacement will be
provided for this purpose.
Store the ink cartridge with the label facing up. Do not store the ink
cartridge top down.
Do not attempt to disassemble or refill the ink cartridge. This may
damage the built-in print head and make the cartridge unusable.
Do not touch the ink outlet or the adjacent area.
Do not remove or pull the label.
Avoid contact with ink on textiles.