16 Shipping instructions for return
In case of a necessary shipment (for example, maintenance, repair) of
the mp-IM1 you must observe the following:
Always switch off the device by pressing the power button so that
the ink cartridge carriage drives into its parking position and will
fixed in place.
Never take the device out of operation by unplugging the power
plug only!
Remove the base plate (GP) from the carrier plate. The base plate
will remain with you.
Remove the ink cartridge from the device. The ink cartridge will
remain with you.
Fix the carrier plate in the device with an adhesive tape.
Secure the service flap and all movable parts with an adhesive
tape.
Enclose the USB connecting cable, the power cable, and the
power supply unit to the shipment.
If possible, ship the device only in its original carton with
appropriate polystyrene moulded parts or in suitable other
packaging.
The device may only be transported lying horizontally. A readable
note must be affixed to the carton before shipment.
Contact the ACS Helpdesk if you have any questions.
For damages and/or soiling caused by non-compliance with the points
listed here, we reject any liability or assumption of costs.
To Next Page
Loading...