Murrplastik mp-IM1 - Declaration of European Conformity

38
Declaration of European Conformity
Murrplastik Systemtechnik GmbH
Dieselstraße 10
71570 Oppenweiler, Germany
herewith declare, that the test of the printer
mp-IM1
were successfully passed according to the
Low Voltage Directive 2014/35 / EU and the EMC Directive 2014/30 / EU.
The printer mp-IM1 meets the following standards in detail:
Equipment safety EN 60950-1.2006 + A11: 2009 +
A1:2010 + A12:2011
Information technology equipment – Radio disturbance characteristics
Limit values and measurement methods EN 55022 B:2011-12
Information technology equipment – Immunity characteristics
Limit values of test methods EN 55024: 2016-05
Electrostatic discharge (ESD) EN 61000-4-2: 2009-12
Interference radiation EN 61000-4-3: 2011-04
Burst EN 61000-4-4: 2013-04
Surge EN 61000-4-5: 2015-03
Conducted interference EN 61000-4-6: 2014-08
Testing immunity to magnetic fields with
energy-related frequencies EN 61000-4-8: 11.2010
Voltage interruption/voltage drop EN 61000-4-8: 11.2010
Harmonic currents EN 61000-3-2: 2015-03
Voltage changes and fluctuations, flicker EN 61000-3-3: 2014-03
Matthias Holzwarth, M.Sc., M.C.C.
02.01.2019