13 Cleaning and maintenance
In order to keep the mp-IM1 printer in good condition and functional,
it should be cleaned and maintained periodically, if necessary also
more times.
13.1 Cleaning the mp-IM1 printer
Switch off the printer.
Unplug the power cable.
Use a dry, soft cloth to remove dust and other foreign bodies.
To remove stubborn dirt, carefully clean the printer using a cloth
moistened with water or a neutral detergent. Then dry off the printer
thoroughly!
Do not use any aggressive cleaning agents or
scourers. These can cause discolouration or
deformation of the housing.
Never use compressed air to clean
the device or parts of it!
To Next Page
Loading...