Overview
You have successfully built Ambika, Congratulations!
Ambika is a multi-voice hybrid synthesizer. You can play it as a 6-voice polysynth, an
ensemble of 6 monosynths, or anything in between due to its easily configurable voicing
architecture.
The sound generation is hybrid, combining the warmth and sonic character of a true 4-
pole analog filter, with the large array of waveforms offered by digital wavetables, fm and
phase modulation. The digital control of the analogue filter and VCA also means a very
large palette of modulation possibilities.
Some of the key features of Ambika include:
•
6 voices with individual outputs.
•
2 digital oscillators per voice, with 36 oscillator algorithms/wavetables.
•
1 sub-oscillator, also configurable as a transient generator.
•
Pre-filter overdrive and bit-crushing effect.
•
Analog 4-pole filter (or 2-pole multimode filter depending on the type of
voicecard used) and VCA.
•
3 ADSR envelopes, 3 patch-level LFOs, 1 voice-level LFO.
•
Modulation matrix with 14 slots and 4 modulation modifiers.
•
1 arpeggiator, 1 note sequencer and 2 step sequencers per part.
•
Flexible mapping of the 6 voices. A single patch with 6 voice-polyphony,
6 independent mono parts, 2 layered patches with 3-voices polyphony, a
3-voice unison bass line on the lower half of the keyboard with a 3-voice
unison lead on the upper half… all are possible!
•
SD-card storage allows the storing of a life-long of patches, programs
and multis, along with the history of editing operations for undo/redo.
5
To Next Page
Loading...
Need help?
General
