MUTOH XPJ-661UF - Adjust Print Quality Settings

Set1: User Type 65
Effect
Super Fine 6 Colors 1440 × 1440 32pass Uni (unidirectional) i-Weave UV
4 Colors 1440 × 1440 16pass Uni (unidirectional) i-Weave UV
Selects the effect.
Set up this menu when you want to improve print quality by adjusting the set
print mode.
Setting values
The Effect function is not applied.
The printing joint will shade off.
This is the default setting.
**>2: Adjust Print>
Adjusts the printer to optimize the print quality for the media.
• Required media size: width 210 mm x length 100 mm.

"Confirm pattern" P. 83
"Rough adjustment pattern" P. 67
"Fine adjustment pattern" P. 67
Submenus
Print a confirm pattern.
Print rough adjustment patterns A to C
and enter adjustment values.
Print rough adjustment pattern A only
and enter an adjustment value.
Print rough adjustment pattern B only and
enter an adjustment value.
Print rough adjustment pattern C only
and enter an adjustment value.
Print fine adjustment patterns A to C and
enter adjustment values.
Print fine adjustment pattern A only and
enter an adjustment value.
Print Mode Color set Resolution Pass Direction Initial values for
effect
＊＊：Mode:  Fast
7201080 12pass Uni
**:Effect:
None
**:Effect:
  i-WeaveUV
Type**:2
AdjustPrint
**:AdjustPrint1
  ConfirmPattern
**:AdjustPrint2
  RoughPatternALL
**:AdjustPrint3
  RoughPatternA
**:AdjustPrint4
  RoughPatternB
**:AdjustPrint5
  RoughPatternC
**:AdjustPrint6
  FinePatternALL
**:AdjustPrint7
  FinePatternA