To Next PageTo Next Page
Need help?Do you have a question about the MUTOH VJ-1624 and is the answer not in the manual?
General| Print Resolution | 1440 x 1440 dpi |
|---|---|
| Number of Print Heads | 4 |
| Maximum Print Width | 1625 mm |
| Ink Type | Eco-Solvent Ink |
| Ink Colors | 4 colors (CMYK) |
| Media Types | Vinyl, banner, canvas |
| Media Width | 1625 mm (64 inches) |
| Connectivity | USB, Ethernet |
| Power Requirements | 50/60Hz |
Explains the meanings of warning terms and symbols used in the manual.
Provides general cautions for safe operation and installation of the printer.
Details handling, locations, and types of warning labels on the printer.
Highlights the printer's main features like high-speed output and color reproduction.
Identifies and describes the function of each printer part.
Explains the different status modes of the printer operation panel.
Provides instructions and warnings for connecting the printer's power cable.
Details the procedure for turning the printer power on and off.
Describes the process for installing ink cartridges and adapters.
Explains how to adjust the ink cartridge slot angle for different cartridges.
Provides instructions on how to load and set media for printing.
Details the procedure for setting roll media into the printer.
Explains how to configure user-defined settings for printing.
Guides users through performing test prints to confirm printer functionality.
Describes methods for optimizing print quality through micro-alignment adjustments.
Explains the system requirements and steps for connecting the printer to a PC.
Illustrates the step-by-step procedure for performing printing.
Provides details on available media types and handling precautions.
Explains how to adjust the print head height to prevent rubbing.
Details procedures to improve media feeding accuracy.
Describes how to install media holder plates to prevent media curling.
Explains how to configure printer settings via the operation panel menu.
Covers various functions that can be operated directly from the printer's panel.
Guides on attaching and using the optional spectrophotometer for color calibration.
Provides an overview of various printer settings configurable via the menu.
Details the options for performing nozzle checks and setup list prints.
Explains the procedures for performing head cleaning operations.
Allows customization of which setup menu items are displayed.
Displays the firmware versions of the printer's main and controller sides.
Configures the printer's behavior and settings when entering sleep mode.
Sets the language and units displayed on the operation panel's LCD.
Describes how and when to replace ink cartridges, roll media, and sponges.
Provides steps for replacing the flushing-box sponges.
Details the procedure and type for replacing the printer's cutter.
Explains periodic cleaning procedures for the printer's exterior and interior.
Guides on cleaning the print head and nozzles to resolve print quality issues.
Describes the procedure for cleaning the cleaning wiper.
Explains how to clean the area around the print head.
Details the timing and method for safely disposing of printer waste fluids.
Provides instructions for moving and transporting the printer safely.
Describes common printer malfunctions, their causes, and solutions.
Lists messages displayed during operation, including errors, and their remedies.
Provides procedures for safely removing jammed media from the printer.
Details the technical specifications of the printer.
Describes the network interface specifications supported by the product.
Information on available options and supply items for the printer.
