VJ-1624 OPERATION MANUAL 7 Troubleshooting
7-7
(4) White or black lines appear on printed media
(5) Printing lines are not straight
(6) Printing lines are duplicated or patchy
5 Did you perform Media feed compensation? Perform Media feed compensation.
4.2.6 Media feed
compensation
6 Is the temperature setting of each heater
appropriate?
Set the temperature appropriately.
5.1.1.1.5 Pre-
heater menu to
5.1.1.1.7 Dryer menu
7 Is the head height set to High? Return the head height to "Low".
4.2.5 Head
height adjustment
No. Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
2 Is the roll media loaded correctly? Load the roll media correctly.
3.4.1 Loading
roll media
3 Is the nozzle in good condition? Perform Head cleaning.
6.2.3 Head
cleaning
4 Did you perform Alignment? Perform Alignment.
3.6 Adjust Print
5 Did you perform Media feed compensation? Perform Media feed compensation.
4.2.6 Media feed
compensation
6 Is the temperature setting of each heater
appropriate?
Set the temperature appropriately.
5.1.1.1.5 Pre-
heater menu to
5.1.1.1.7 Dryer menu
7 Is the head height set to High? Return the head height to "Low".
4.2.5 Head
height adjustment
No. Possible cause Remedy Reference
1 Is the ink cartridge within the validity period? Use a new ink cartridge.
6.1.1 Replacing
ink cartridges
2 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
3 Did you perform Alignment? Perform Alignment.
3.6 Adjust Print
4 Did you perform Media feed compensation? Perform Media feed compensation.
4.2.6 Media feed
compensation
No. Possible cause Remedy Reference
1 Is the nozzle in good condition? Perform Head cleaning.
6.2.3 Head
cleaning
2 Is the head height set to High? Return the head height to "Low".
4.2.5 Head
height adjustment
No. Possible cause Remedy Reference