VJ-1624 OPERATION MANUAL 7 Troubleshooting
7-9
7.2.2 Message type error display and remedies
This section describes message type errors and remedies.
Message type errors are displayed when certain failures occur during printer operation.
If a message type error occurs, the printer may display the following error messages on the operation
panel and stop operation.
If the printer stops operating, solve the error so that the printer restarts.
NOTE
For color measuring mode errors (errors 25 to 36 below), take countermeasures, and press the [Cancel]
key for more than 2 seconds to solve the message type error.
17 ** Initialing ** Initializing the setting in the Initialization
menu.
Please wait a while.
5.1.21
Initialization menu
18 Power Off Turning the printer off.
Please wait a while.
Do not unplug the power cable till the
operation panel is turned off.
3.2.2 Turning the
power OFF
19 Change Head Gap Low Turning the power off.
Set the head height to Low.
4.2.5.2 When
returning the print
head to the original
position
20 Insert CleaningCart. Washing the head.
Install the cleaning cartridge.
3.3 Installing ink
cartridges
21 Insert InkCartridgess Filling the ink.
Insert the ink cartridge.
3.3 Installing ink
cartridges
22 User: Type ** OK? Initializing the media.
Please wait a while.
(** represents the setup media type. )
3.4.3 Setting the
User Type Setting
23 Media Initial
No. Display Description Remedy Reference
1 Cover Open Front cover is open. Close the front cover.
3.4 Loading
media
2 Mainte. CoverL Open Left Maintenance cover is
open.
Close Maintenance cover.
2.2 Names of
parts and functions
3 Mainte. CoverR Open Right Maintenance cover is
open.
Close Maintenance cover.
2.2 Names of
parts and functions
4 Lever Up Media set lever is raised. Lower Media set lever.
2.2 Names of
parts and functions
5 Lever Up Media is not loaded. Set the media.
3.4 Loading
media
No. Display Description Reference
To Next Page
Loading...
Need help?
General