3 Before using VJ-1624 OPERATION MANUAL
3-2
3.1 Power cable connection
This section explains power cable connection.
WARNING
• Be sure to use the specified power cable.
Using power cables other than the specified can cause an electric shock or fire.
• Use a power cord set which is compatible with the safety standards, power supply
voltage, and plug shape used in the country where this printer is used.
• Use a power cord set which is equipped with a protective earth, and securely
connect it to the outlet.
• Do not use a damaged power cable.
It could lead to an electric shock and fire.
CAUTION
• Pay attention to the following points when handling power cable.
• Do not tamper with the power cable.
• Do not put heavy objects on the power cable.
• Do not bend, twist or pull the power cable by force.
• Do not route the power cable near heating appliances.
NOTE
• Contact your local MUTOH dealer in case of power cable damage.
Follow the procedure below to install the power cable.
1. Make sure that the printer is turned OFF.
To Next Page
Loading...
Need help?
General