MUTOH VJ-1624 - Platen Heater Menu

VJ-1624 OPERATION MANUAL 5 Panel setup menu
5-13
5.1.1.1.6 Platen heater menu
Sets the temperature of the platen heater.
Set to improve print quality by allowing the ink to settle by heat.
NOTE
• The set temperature of the platen heater differs depending on the media.
For the set temperatures of the platen heater, refer to "recommended media list".
Setup item Setting Description
Pre heater Off / <30 °C> to 50 °C Sets the temperature of the pre-heater.
1.Roll media
2.Pre heater
3.Print head
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu
23
1