5 Panel setup menu VJ-1624 OPERATION MANUAL
5-26
NOTE
• The minimum travel range of the printer’s CR is 900mm.
• Note that even when the media with a width that is below 900mm is loaded while the printer is set
to "Data" or "Media Width", the actual CR travel range does not go below 900mm.
5.1.12 Multi Strike menu
Sets up the overwrite count per line.
5.1.13 Strike Wait menu
Sets up the waiting time while overwrite printing.
NOTE
• When using the media with a narrow width, the media cannot be warmed up adequately, therefore
the print quality may not be preserved.
In such a case, set up the Strike Wait time while overwrite printing to warm up the media adequately
before printing.
Setup item Setting Description
CR Movement Data The print head moves the range of the print data width.
The printing speed will be improved since the moving range
of the print head is optimized.
Machine The print head moves from origin to the maximum printable
media width.
<Media Width> The print head moves the range of the media width.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Multi Strike <1 time> to 9 times Set the overwrite count.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
To Next Page
Loading...
Need help?
General