5 Panel setup menu VJ-1624 OPERATION MANUAL
5-22
5.1.6.1 Ink Drying Time Menu
This menu is used to set ink drying time.
5.1.7 Method of Cut menu
Sets the media cutting operation after printing.
NOTE
• Some media may not be cut (cannot be cut at all or cannot be cut finely). In such a case, set the
"Output Mode menu" to "Off" and cut the media manually.
• 5.1.6 Output Mode menu
Setup item Setting Description
Output mode <Off> Set when not cutting the media automatically after printing.
(Set it to "Off" even when cutting the media manually.))
Take-up Set when using the take-up unit.
(The media will not be cut after printing.)
Auto cut Set when cutting the media automatically.
5.1.7 Method of Cut menu
— • [Enter] key: saves the setting and shifts to the sub menu.
5.1.6.1 Ink Drying Time Menu
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup Item Setting Description
Ink drying time <0sec> to 60min Set the ink drying time.
— • [Enter] key: Saves the set value and shifts to the previous
menu.
• [Cancel] key: Cancels the setting and shifts to the previous
menu.
5.1.6 Output Mode menu
To Next Page
Loading...
Need help?
General