MUTOH VJ-1624 - Replacing Cutter

VJ-1624 OPERATION MANUAL 6 Maintenance
6-17
CAUTION
• Do not drop waste fluid when replacing the flushing-box sponges.
If waste fluid comes into contact with the grid roller, the surface of the grid roller
will be damaged, and the media feed function may be affected.
4. Install the new flushing-box sponge to each flushing box.
5. Close the front cover.
• Flushing-box sponge replacement is complete.
6.1.4 Replacing Cutter
This section describes when and how to replace the cutter.
(1) Replacement time
Replace the cutter when the following situation occurs.
a. When the paper is not cut smoothly
b. When the cut surface is feathered, etc
(2) Type
Our genuine cutter that is compatible with the printer is as follows.
No. Name
1 Front cover
Description Model No.
Cutter replacement blade VJ-CB
1