MUTOH VJ-1624 User Manual

VJ-1624 OPERATION MANUAL 6 Maintenance
6-11
• The procedure for replacing the roll media is complete.
6.1.3 Replacing the flushing-box sponges
This section explains how to replace the flushing-box sponges.
(1) Replacement time
Replace the flushing-box sponges in the following situations.
a. When the flushing-box sponge is deformed
b. When the ink is spattered on the media
c. When more than two months have passed since the last replacement
(2) Type
TIP
• For types and details of the flushing-box sponge, refer to "8.3 Options/Supply list".
(3) Replacing steps
You need to replace 2 Flushing-box sponges on the origin side and the opposite side of the origin point.
(3-a) Replacement procedure (on the origin side)
Follow the procedure below to replace the Flushing-box sponge on the origin side.
No. Name
1 Flushing-box sponge on the origin side
2 Flushing-box sponge on the opposite side of the origin point
1
2
1

MUTOH VJ-1624 Specifications

General

Brand	MUTOH
Model	VJ-1624
Category	Printer
Language	English