3 Before using VJ-1624 OPERATION MANUAL
3-6
3.2 Turning the power ON/OFF
This section explains how to turn the printer ON/OFF.
3.2.1 Turning the power ON
Follow the procedure below to turn the power ON.
1. Press the [Power] key on the operation panel to turn ON the printer.
• The Power lamp on the operation panel lights up in blue.
• The printer starts initial operation.
• When the initial operation is complete, the printer enters Normal.
NOTE
• If there is a problem during the initial operation, a message is displayed on the operation panel
and the printer may stop operating.
If operation stops, refer to "7 Troubleshooting" and deal with the problem.
3.2.2 Turning the power OFF
Follow the procedure below to turn the printer OFF.
1. Verify the following regarding the operational condition of the product.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
• The Low lamp on the operation panel lights up in green.
To Next Page
Loading...
Need help?
General