VJ-1624 OPERATION MANUAL 3 Before using
3-7
NOTE
• If the High lamp on the operation panel lights up in green, the head height is set to High.
Return the head height to Low before turning the power OFF.
4.2.5.2 When returning the print head to the original position
2. Press the [Power] key on the operation panel to turn OFF the printer.
• The Power lamp on the operation panel is turned off.
NOTE
• If the operation panel is in the following status, the power is ON.
• The [Power] key is pressed in.
• The Power lamp lights up in blue.
Press the key once again to turn OFF the power.
• The printer starts the procedure to turn the power OFF.
• "Power Off" is displayed on the operation panel.
NOTE
• If the head height is set to High, "Set Height to Low" is displayed on the operation panel and
the procedure to turn the power OFF stops.
To restart the procedure, return the head height to Low.
4.2.5.2 When returning the print head to the original position
• All the lamps on the operation panel and the LCD monitor are turned OFF.
• The printer automatically turns the power OFF.
To Next Page
Loading...
Need help?
General