5 Panel setup menu VJ-1624 OPERATION MANUAL
5-30
5.1.18 Exhaust Fan menu
Sets the operation of Exhaust Fan.
5.1.19 Longstore menu
Wash the print head with the cleaning fluid.
NOTE
• Make sure to use the dedicated cleaning fluid (Model number: VJ-MSINK3-CL220/VJ-MSINK3-
CL1000).
Setup item Setting Description
Length 1 m to <30 mm> to 99 mm Sets the roll media length.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Exhaust Fan Off Stops Exhaust fan operation.
<Low> Exhaust fan rounds slowly.
High Exhaust fan rounds fast.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Longstore Start Wash the print head with the cleaning fluid.
• [Enter] key:
Performs the head washing operation.
The following content is displayed on the operation panel.
Remove Cartridges Remove the ink cartridge, and install the cleaning cartridge.
6.1.1 Replacing ink cartridges
— • [Cancel] key: shifts to the previous menu without Head
washing.
5.1 Setup menu
To Next Page
Loading...
Need help?
General