VJ-1624 OPERATION MANUAL 5 Panel setup menu
5-29
5.1.16 Ink Status menu
Displays the various information of smart chips.
NOTE
• To display the various information of Smart chips, use genuine ink and S/C cards.
If ink cartridges other than genuine ink cartridges are used, ink status will not be displayed
correctly.
5.1.17 Roll Length menu
Sets up the roll media length.
5.1.17.1 Roll Length menu
Sets up the roll media length.
NOTE
• After replacing the roll media, set the roll media length again.
If the roll media length is not set, the residual quantity of roll media may not be displayed correctly.
Setup item Setting Description
KCMY 0 to 100 (unit: %) The amount of ink remaining in each ink cartridge of K/C/M/
Y is displayed.
— • [Cancel] key: shifts to the previous menu.
5.1 Setup menu
Setup item Setting Description
Roll media <Off> Roll Length is not used.
• [Enter] key: saves the setting and shifts to the previous
menu.
5.1 Setup menu
Roll1 Sets up the roll media length.
The set values of the roll media length can be set as "Roll1" to
"Roll3".
• [Enter] key: saves the setting and shifts to the sub menu.
5.1.17.1 Roll Length menu
Roll2
Roll3
— • [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
To Next Page
Loading...
Need help?
General