VJ-1624 OPERATION MANUAL 5 Panel setup menu
5-17
5.1.2.1 Spitting Pass count menu
Set the frequency (spitting return count) that the print head returns to the spitting box (located) on the
origin side when setting "On" or "On Media" in the Spitting menu.
NOTE
• If you set the flushing return count to a high number, the nozzle will become easily clogged when
printing for a long time because flushing is not performed over the flushing box.
<Example of spitting operation>
Setup item Setting Description
Spitting <On> Perform the flushing operation on the flushing box located on
the origin side for every shuttle.
• [Enter] key: saves the setting and shifts to the sub menu.
5.1 Setup menu
On Media Perform the flushing operation on the page margins.
The printing speed will be improved since the number of time
to return to the flushing box is reduced.
• [Enter] key: saves the setting and shifts to the sub menu.
5.1.2.1 Spitting Pass count menu
Off Spitting operation is not performed.
• [Enter] key: saves the setting and shifts to the previous
menu.
5.1 Setup menu
— • [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
ReturnCount <1 time> to 999 times Set the flushing return count.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.2 Spitting menu
Spitting setting Return Count setting Operation
On 1 time Performs the spitting operation on the flushing box on the
origin side every time the print head returns to the origin
position.
Flushing is not performed over the media.
On 5 times Performs the spitting operation on the spitting box on the
origin side every five times the print head returns to the origin
position.
Flushing is not performed over the media.