7 Troubleshooting VJ-1624 OPERATION MANUAL
7-8
7.2 Error messages
This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
7.2.1 Status messages
This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as
below.
No. Display Description Reference
1 Ready to Print Standby (Media is loaded). —
2 Media End Standby (Media is not loaded).
3.4 Loading
media
3 Receiving Receiving data. —
4 Analyzing data Analyzing data. —
5 Printing Under printing. —
6 PrintRestart – > ENTER Pausing printing.
Press the [Enter] key.
7 Warming Up Warming up the heater. —
8Warming Up
Skip – > ENTER
Received the print data while the heater is
being heated.
To start printing before the heater is warmed
up, press the [Enter] key.
4.4.7 Start
Printing during Warm
up
9 Cleaning **% Cleaning the head.
Please wait a while.
6.2.3 Head
cleaning
10 Ink Refill **% Filling the ink.
Please wait a while.
3.3 Installing ink
cartridges
11 SubTank Refill **% Filling the subtank.
Please wait a while.
3.3 Installing ink
cartridges
12 During Washing Washing the print head by the head washing
operation.
Please wait a while.
3.3 Installing ink
cartridges
13 Moving Origin Pos. The print head is moving to the original
printing position in the Origin menu.
Please wait a while.
5.1.8 Origin
menu
14 Confirm Position – >E The print head is moving to the original
printing position in the Origin menu.
Press the [Enter] key.
5.1.8 Origin
menu
15 Head Cleaning Cleaning Head.
Wait for a moment.
5.1.19 Longstore
menu
16 Remove Cartridges Performs head cleaning.
Remove cartridges.
5.1.19 Longstore
menu
To Next Page
Loading...
Need help?
General