5 Panel setup menu VJ-1624 OPERATION MANUAL
5-12
(5) Micro Adj.Change menu
Sets up Micro Adjustment Change.
5.1.1.1.5 Pre-heater menu
Sets the temperature of the pre-heater.
Set to curb a rapid temperature change at the printing portion by pre-heating the media before printing.
NOTE
• The set temperature of the pre-heater differs depending on the media.
For the set temperatures of the pre-heater, refer to "recommended media list".
Setup item Setting Description
Micro Adj. Print Printing Prints the following PF pattern (micro adjustment) with a
focus on the micro adjustment value.
• 0%, ±0.05%, ±0.1%, ±0.2%
— • [Cancel] key: shifts to the previous menu.
Stops printing and returns to the previous menu if printing
is in progress.
5.1 Setup menu
Setup item Setting Description
Micro Adj.Change -5.00%~<0.00>~5.00% Sets up Micro Adjustment Change.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
To Next Page
Loading...
Need help?
General