MUTOH VJ-1624 User Manual

VJ-1624 OPERATION MANUAL 5 Panel setup menu
5-11
(1) Init.Adj.Print menu
Performs Initial Adjust Print.
(2) Init.Adj.Change menu
Sets up Initial Adjust Change.
(3) Confirm Print menu
Performs Confirm Print.
(4) Micro Adj. Print menu
Performs Micro Adjustment Print.
Setup item Setting Description
FeedLength 100mm to <250mm> to
500mm
Changes the length (feed length) of the media feed direction
for initial adjust print.
• [Enter] key:
Determines the setting.
"Printing" is displayed on the operation panel and initial
adjust print starts.
After printing, the printer enters Normal.
— • [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.4 Media feed compensation
Setup item Setting Description
Init. The set value ±50.0mm in
"Feed length" of Initial adjust
print
Sets up Initial Adjust Change.
e.g) When the set value in "Feed length*" of Initial adjust print
is set to 250mm, the adjustment range in this menu is 200mm
to 300mm.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.4 Media feed compensation
Setup item Setting Description
FeedLength 100mm to <250mm> to
500mm
Changes the length (feed length) of the media feed direction
for Confirm Print.
• [Enter] key:
Determines the setting.
"Printing" is displayed on the operation panel and initial
adjust print starts.
After printing, the printer enters Normal.
— • [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.4 Media feed compensation

MUTOH VJ-1624 Specifications

General

Brand	MUTOH
Model	VJ-1624
Category	Printer
Language	English