VJ-1624 OPERATION MANUAL 3 Before using
3-49
NOTE
• When you press the [Cancel] key, the input operation is not executed and "Adj.2: Rough
Pattern" is displayed on the operation panel.
7. Press the [Enter] key on the operation panel.
• The value is set in the "Adjustment: *" (* indicates a number from 1 to 11).
• The operation panel display returns to "Adj.2: Rough Pattern".
3.6.1.3 Standard Micro Adjustment Pattern
Check the confirmation pattern, and when the misalignment is small, perform micro adjustment.
Print a micro adjustment pattern and register the setting value.
1. Display the Adjust Print menu on the operation panel in the same way as in step 2 of "3.6.1.1
Standard Confirmation Pattern"
2. Press the [+] key or [-] key to select "Adj.3: Fine Pattern".
To Next Page
Loading...
