6 Maintenance VJ-1624 OPERATION MANUAL
6-34
• The print head returns to its original position.
• The cleaning wiper returns to the original position.
• "CR Maine.: Start" is displayed on the operation panel.
8. Press the [Menu] key on the operation panel.
• The printer enters Normal.
• Cleaning the cleaning wiper is complete.
6.2.5 Cleaning around the print head
This section describes how to clean around the print head.
(1) Time for cleaning
When foreign substances such as dust or ink clump that can cause missing dots or ink leakage is attached
around the print head
(2) Cleaning procedures
Follow the procedure below to clean around the print head.