- 90 -
MAINTENANCE 6
6
6.7 Checking the wear of the brake pads
The brake pads have grooves that provide an
indication of the wear condition. Periodically
check the width of the grooves, making sure it
never falls below the wear limit (1 mm).
Danger - Warning: If the pads have
almost worn down to the wear limit,
have them replaced by an authorized
service centre.
Allow the new pads a suitable period of
running-in (see § 4.2).
Front brake caliper Rear brake caliper
Disc
Pads
Groove
Wear limit 1 mm
To Next Page
Loading...
