- 95 -
MAINTENANCE 6
6
Lubrication
To ensure proper operation, the drive chain needs
to be properly lubricated.
Preliminary cleaning - Before lubrication the
dirt accumulated on the chain must be dissolved
using specific products. The dirt must then be
removed with a clean rag and/or an air jet.
Caution - The chain is of the O-ring type.
Be sure to use cleaning products specif-
ically designed for chains of this type.
Lubrication - Apply a film of lubricant over the
whole of the drive chain, taking care not to smear
the surrounding parts, and in particular the tyres.
Caution - Only use the recommended
lubricant or an equivalent product (see §
6.3).
WARNING
Riding when the drive chain is in poor
condition or improperly adjusted can
cause accidents.
To Next Page
Loading...
