Service 18
2.5 Power stage
Using the spare power stage – 33 4099 0099
WMF 1500S+; WMF 5000S+, WMF 9000S+; WMF 9000F, Syrup accessory equipment
All inputs and outputs are located on the power stage.
The power stage is protected against overcurrent and short circuits by 10 current sensors and a current detector.
The outputs for controlling the brewer motor are non-locking.
This means that these outputs are normally protected. Only a direct short circuit can damage the outputs.
All other outputs are short circuit-resistant. The outputs are not damaged even in the event of short circuit.
To Next Page
Loading...