Service 20
A platform front panel can be used universally with all of the machine types listed. Front panel that have already been in use can also be reused.
Using the Panel Updater (an auxiliary program found on the front panel) and an inserted USB stick with appropriate machine software, the platform front panel is
programmed to make a machine-specific spare parts front panel with serial number #100.
There is then an opportunity, as has always been the case, to use the microSD card from the defective front panel and restore all of the data completely.
Using
-> the history of the front panel can be viewed here
-> this starts the Panel updater
If the Panel Updater can no longer be started by means of the machine software, then there is also the option of starting it via the USB stick.
To do so, place a text file named “reset.txt” on the USB stick, insert it in the front panel, and switch on the machine.
To Next Page
Loading...