13
Cutting Operation on the Cutting Line Operation Procedures
3-1 Cutting Operation on the Cutting Line
Remove the cut sheets.
- The value of the cutting length appears in the
box of the current position of the backgauge.
If you memorize this value, the sheets can be
cut for the same length at the next time.
- If the button is pressed, the cut sheets is
pushed forward.
(The cutting position changes. If you memo-
rizes the value, input the value using the
numeric keypad. The backgauge moves to
the set position.)
Current Position
of the Backgauge
Numeric Keypad
To Next Page
Loading...
