MyBinding Standard APC45 Programmable - Page 49

41
Problems and Remedies Troubleshooting
5-2 Problems And Remedies
Problem Causes and Remedies See
Sheet
remains
uncut.
• If the cutting stick is worn, the
sheet may remain uncut. (Use
another face of the cutting stick.)
• If the knife becomes dull, the
sheet may remain uncut. (The
replacement of the knife is nec-
essary.)
4-1 Knife
Lower Limit
Adjustment
4-2 Knife
Angle
Adjustment
4-3 Cutting
Stick
Replace-
ment
For the
Knife
Replace-
ment,
Service
Call
Some of the
cut sheets
are bent.
• If the cutting stick is worn, some
of the cut sheets may be bent.
(Use another face of the cutting
stick.)
• If the knife becomes dull, some
of the cut sheets may be bent.
(The replacement of the knife is
necessary.)
4-3 Cutting
Stick
Replace-
ment
For the
Knife
Replace-
ment,
Service
Call
Uncut
Knife
Sheet
Bent