myPOS D210c - Page 9

Once it has connected to your Wi-Fi
network, D210c will perform a test of the
connection to myPOS.
If the test is successful the following
D210c screen will appear:
If the connection test is unsuccessful, the
D210c screen will display an error
message.
Useful tips:
When D210c connects to a Wi-Fi network, the information is saved so that
the next time you are within the range of the same network, the terminal will
connect to it automatically.
If the password of your Wi-Fi network has
been changed, the Wi-Fi signal icon on the
screen ( ) will become grey
If you try to make a payment transaction,
the terminal will display an error message
– “You are not connected to any network” -
and will search for available networks. If a
previously used network is found, the
D210c device will connect to it
automatically and will process the
transaction.
In order to change the saved password,
choose the “Change connection type”
option from the SETTINGS MENU 1 and
enter the new password when prompted.
If you are within a previously used
network range and do not want your
D 2 1 0 c d e v i c e t o c o n n e c t t o i t
automatically, you can delete the saved
data by choosing option 3: “Forget this
network”.
џ
џ
џ
џ
џ
EN 9|