- If edentulous areas are irradiated, the device may provide images that are too blackened in the missing areas of
the irradiated radiographic subject. In these cases, reduce the time indicated in the table by about 1/4.
- The best results are achieved with a high frequency generator with square collimator and 30cm focus-to-skin
distance (refer to the relevant table).
- For a better distance control, we suggest using a centring device with fixed spacer between centring ring and
sensor.
- Before attempting to use the product on a patient, practice by taking a few x-ray pictures on inanimate objects
with your own x-ray unit.
- Do not exceed the dose in the chart.
In order to limit patient exposure to radiation, only use x-ray generators having a collimation compatible with
the size of the sensitive area of the intraoral film.
4.3. MINIMUM PREREQUISITES
For more details on minimum and recommended hardware and software requirements for workstations directly
connected to reference or additional devices, refer to the “Minimum and Recommended System Requirements”
attachment.
To Next Page
Loading...
