N-Com B902 X Series User Manual

EN
26
Pairing up of CHANNEL 1
Briefly press key “
n
”.
Pairing up of CHANNEL 2
Press 2 times key “
n
”.
Pairing up of CHANNEL 3
Press 3 times key “
n
”.
N.B.
: In case there are already other intercom systems stored in the memory of the B902 system, check
on the EASYSET N-Com App which channels are still available. If a channel that is already used is
selected during pair up, the new intercom system will overwrite the one previously stored on that
channel.
• After a few seconds, Intercom B will emit the confirmation beep.
18.2. Universal Intercom Function
To turn on and off the audio between two helmets, proceed as follows:
From the N-Com B902 system:
Connect or disconnect Intercom B as you would for a regular N-Com intercom (chapter 17.3).
Intercom B may receive a dialling tone that must be answered with a phone reply command.
From intercom B
To enable the intercom connection, press the “ Voice Call ” or “ Last number redial ” command.
To disable the intercom connection, press the “ Hang up ” or “ Reject phone call ” command.
N.B.
: Some systems are not able to handle the activation / deactivation of the intercom connection. In
this case, operate from the B902 system.
N.B.:
• During use of the UNIVERSAL INTERCOM, the B902 system keeps the connection active to the
MAIN DEVICE only (and not to the SECOND MOBILE PHONE or to the SATELLITE NAVIGATOR).
• The intercom system connected to N-Com B902 may not allow simultaneous connection to a
mobile phone.
• Only one system paired up in Universal Intercom mode can be stored.
18.3. Universal Conference (chain intercom)
The “Universal Conference” mode can be used to connect in conference call N-Com systems of the
“900” series and one system paired up in Universal Intercom mode.
The connection procedure is outlined in the diagram provided here below:
1. System A must have been paired up beforehand to two B systems (Universal Intercom pair
up) and C.
2. System A has to initiate the first intercom connection with system B (Universal Intercom), by
pressing the relative intercom connection command.

N-Com B902 X Series Specifications

General

Brand	N-Com
Model	B902 X Series
Category	Motorcycle Accessories
Language	English