16
11. EMERGENCY STOP SIGNAL (ESS)
The M5 system is equipped with a LED system to assist emergency braking. In case of sudden
braking, the LEDs on the M5 flash for a few seconds.
The braking level can be adjusted through a PC (N-Com Wizard) or Smartphone
Android, iPhone and iPad thanks to the dedicated N-Com App.
Turning on/off the Emergency Stop
Signal (ESS)
Press the BACK key briefly
OR
Press the “” and “” keys and keep them pressed for about
2 seconds.
N.B.: We recommend turning off the Emergency Stop Signal on the Rider’s helmet in case a Pillion
Passenger is riding on the back.
12. RIDER-PASSENGER INTERCOM
12.1. Rider-Passenger intercom pairing up
Make sure the M5 is turned off;
Put both systems in Setting mode (press the “BACK” key and keep it pressed for 4 seconds,
until the red LED starts to flash quickly);
Press the “n” key briefly on one of the systems (Channel 1 pairing up);
A “wait for connection” tone is emitted until the pair up procedure is not completed.
12.2. Rider-Passenger intercom function
After carrying out the proper pair up procedure, turn on the two helmets. To activate the intercom
connection, starting from an N-Com system that has already been turned on, briefly press key "n".
Manual intercom connection With M5 turned on, briefly press “n”.
Manual intercom
disconnection
With M5 turned on, briefly press “n”.
To Next Page
Loading...
Need help?
General