N-Com M5 User Manual

M5
7
3. INSTALLATION
3.1. Positioning the speakers and the microphone
Fig. 1

Remove the protective film from the Velcro of
the speakers;

Position the speakers near your ears, so that they
stick perfectly to the helmet.
N.B.: If possible, position the speakers
underneath the comfort padding of the helmet.
 Install the microphone
Fig. 2
Flexible boom microphone – recommended

Position the swivel part of the microphone with
the Velcro/adhesive part between helmet shell
and the padding, so that the microphone is
properly positioned in front of your mouth.
Caution: make sure that the side of the
microphone support with the writing “N-Com”
is facing inward.
Fig. 3
Wire microphone

In case it is not possible to use the swivel
microphone, install a wire microphone.

Use the Velcro/adhesive to secure the
microphone inside the helmet, so that it is in
front of your mouth.
N.B.: This type of microphone is more
recommended for full-face helmets.

N-Com M5 Specifications

General

Brand	N-Com
Model	M5
Category	Set-top boxes
Language	English