To Next Page
S
Samantha RobinsonSep 9, 2025
Why is there no power on my NAD CD Player?
- BBrian FullerSep 9, 2025
If there's no power, ensure the power switch is set to the ON position.
Why is there no power on my NAD CD Player?
If there's no power, ensure the power switch is set to the ON position.
How to check if the loading motor drive circuit operation is normal on NAD CD Player?
To check the loading motor drive circuit operation, verify the open/close signal at U401 PIN 65 PIN 66.
How to check open/close key signal M101 switch on NAD CD Player?
To check the open/close key signal M101 switch, check the open/close signal at U401 PIN 66, 65 or pattern and connector open.
General| Type | CD Player |
|---|---|
| Signal-to-Noise Ratio | >110dB |
| Frequency Response | 20Hz - 20kHz |
| Channel Separation | >95dB |
| Digital Output | Coaxial |
| Digital-to-Analog Converter (DAC) | 24-bit/192kHz Delta-Sigma |
| Output Impedance | 100 Ohms |
