LINE LEVEL INPUTS (DISC, CD, VIDEO, AUx, TUNER, TAPE) MEASURED AT SPEAKERS OUTPUT
Input impedance (R and C) 50kΩ + 100pF
Input sensitivity (ref. rated power) 200mV
Maximum input signal 7V
LINE LEVEL OUTPUTS
Output impedance Tape Source Z + 600Ω
TONE CONTROLS
Treble ±5dB at 10kHz
Bass ±8dB at 100Hz
Continuous output power into 8Ω
2
40W (16dBW)
Rated distortion (THD 20Hz - 20kHz) 0.02%
Clipping power (maximum continuous power per channel 4Ω and 8Ω) 40W
IHF Dynamic headroom 8Ω 45W, +16.5dB
4Ω 60W, +17.8dB
IHF dynamic power (maximum short term power per channel) 8Ω 90W (19.5dBW)
4Ω 120W (20.8dBW)
Damping factor (ref. 8Ω, 1kHz) >200
Voltage gain 39dB
Signal/noise ratio, A-weighted
1
ref. 1W 95dB
THD + Noise
3
<0.02%
SMPTE IM
4
<0.02%
IHF IM
5
<0.01%
Headphone output impedance 68Ω
PHYSICAL SPECIFICATIONS
Dimensions (W x H x D)
6
Net 435 x 70 x 242mm
Gross 435 x 80 x 292mm
Net weight 5.25kg (11.5lb)
Shipping weight 6.5kg (14.3lb)
1 From CD input to speakers output, volume setting for 500mV in, 8Ω 1W out
2 Minimum power per channel, 20Hz - 20kHz, both channels driven with no more than rated distortion.
3 Total harmonic distortion, 20Hz - 20kHz from 250mW to rated output
4 Intermodulation distortion, 60Hz - 7kHz, 4:1, from 250mW to rated output
5 CCIF IM distortion, 19 + 20kHz rated output
6 Gross dimensions include feet, volume knob and extended speaker terminals.
Specications are subject to change without notice. For updated documentation and features please log onto www.nadelectronics.com for the latest
information about your C315BEE.
SPECIFICATIONS
ENGLISHFRANÇAISDEUTSCHNEDERLANDSESPAÑOLITALIANOРУССКИЙSVENSKA
9
To Next Page
Loading...
