NAD T737 - Page 13

TUNER CONTROL (for use with NAD Receiver, AM/FM/DAB Tuner): Set the DEVICE SELECTOR
to “TUN” in order to gain access to these buttons. Refer to the corresponding labels printed in the
remote control faceplate and their respective assigned buttons to make use of these functions. Some
of the control buttons below are applicable only to specic NAD Receiver or Tuner models; check the
owner’s manual of your NAD Receiver or Tuner for control button compatibility. You can also load the
applicable NAD code library to this device so that it can be made compatible with your other NAD
equipment. Refer to the section below about “LIBRARY” on how to load a NAD code library.
TUNE [ ] or [ ]: Step up or down between AM or FM frequencies.
PRESET [ ] or [ ]: Step up or down between stored radio presets.
AM/FM/DB: Select DAB, XM, FM or AM band (if applicable).
TUNER MODE: In FM mode, toggle between “FM Mute On” and “FM Mute O”. In DAB mode,
pressing this button will bring up DAB menu options.
BLEND: Engage or disengage BLEND feature.
MEMORY: Save current station into preset memory.
DELETE: Press and hold for about 2 seconds and the selected preset memory is erased.
[ ]: In DAB mode, in combination with TUNER MODE or other compatible buttons, toggle
to select through DAB feature options like Dynamic Range Control, Station Order and other
appropriate DAB options.
ENTER: In AM/FM mode, toggle to select Preset or Tune mode. In DAB mode, press and hold to
check signal strength.
INFO: Repeatedly pressing this button will show information as supplied by the current radio
station. The applicable display contents include related DAB display information and RDS broadcast
data.
NOTE
For iPod player-specic control buttons, please refer to “CONTROL FEATURES” under “OPERATION
– LISTENING TO YOUR iPod PLAYER”.
IDENTIFICATION OF CONTROLS
AVR 3 REMOTE CONTROL
13
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ