Chapter II June 2014
12
RIGHT OUTPUT SIDE PANEL
The right side panel of the recorder is different depending on the version of the recorder. There is one panel
for the standard version without any internal options, another for the time code version and a third one for
the ISDN version, both of the latter two are also available with the 3G / WiFi option. (version pictured has both
Time code and WiFi / 3G installed)
AES output connector
The 3-pole male XLR AES output connector is a digital output
corresponding to the format of the AES bus used throughout the
professional audio industry. The resolution is of 16 or 24 bits depending of
the current machine settings, and if the machine is in 24-bit mode this
output can be redithered to 16 bits to feed a lower resolution device. This
liason allows direct connection to any other digital equipment fitted with
an AES-3 interface.
Line output connectors
These two 3-pole XLR connectors are the standard analog audio
transformerless symmetrical floating outputs. The output level on these
connectors is adjustable from o6 to +15 dBu for 0dBFS on the meters.
To Next Page
