NAPCO GEMINI C Series - ZONE OPTIONS FOR ZONES 73-80; ZONE OPTIONS CONFIGURATION (ZONES 73-80)

NAPCO Gemini C-Series Control Panel Installation Instructions--Volume 3
Page 20 Installation Instructions, Volume 3
When using the GEMC-24VR for 24 volt regulated power, supervise the power with an end-of-line relay as shown
below. Connect the EOL relay to a conventional or SLC zone programmed as a Fire Monitor Zone.
Zone
Programmed
as Fire Monitor
Zone
(–) (+)
POWER
IN
(–) (+)
POWER
OUT
DEVICE
[–]
[+]
LOOP IN
LOOP OUT
EOLR AS
REQUIRED
BY THE
ZONE
UL LISTED END OF
LINE 24V RELAY
+24V
(–)
(–)
(+)
GEMC-24VR
(EXAMPLE)
24V REGULATED AUXILIARY
POWER SUPERVISION
VOUT