NAPCO Magnum Alert 2600 User Manual

CENTRAL-
STAT I Oil IIONI
TORING
Your alarm specialist
may have
progranuned
your
system
to be monitored
by a
central station.
The built-in digital communicator
can
transmit emergency
signals and
status reports
to the
central
station 24
hours a day.
COIIIfl'IIICATOR
FEATURES
Abort
Delay.
Note which of
your
zones have
abort
delay, a delay
that ena-
bles.you
to reset
the
system
before
it commr:nicates
to the central
station.
o
Regular
within
o 24-Hour
first,
Burglary
(Non-24-Hour)
Zone
reports
are
aborted by disarming
the delay
period.
Zones and zones
progranmed
to
report restores
must be repaired
then
the
panel
armed and disarned,
all
within the delay
period.
Opening and Closing
Reporting. Notifies the
central station
every time the
system is disarmed and
armed. Up
to 15
different
users can
each be identi-
f ied.
Telephone-Line Test. Pressing the
[TEST]
Button
wiII test the
telephone
Iine for 12 seconds after the button is released.
Failure is indicated
by
IFAIL,
HIT RESETI on
the
display. See
SETTING
TIIE
ALAru{ UHEN LEAVING
and
SPECIAL FIINCTI0NS:
TEST.
Central-Station
Ringback. The central
station
wiII acknowledge
arming of
the system
by ringing back with
a
shorb beep
from
the
keypad
sounder.
EMERGENCY
SERVICES
(Police
Medical
Etc)
OIGITAL
COMUUNICATOR
EXISTING
TELEPHONE
LINES
MONITORS YOUR
SYSTEM
24 HOURS
A DAY

NAPCO Magnum Alert 2600 Specifications

General

Brand	NAPCO
Model	Magnum Alert 2600
Category	Control Panel
Language	English