NAPCO Magnum Alert 2600 User Manual

THE KEYPAD DISPI.AY
BUTTON
|lith
the keypad
cover lowered,
the
IDISPLAYJ
Button
will
provide
a visual
indication
of
the following conditions on the
readout:
o Zones Faulted
(in
"Trouble").
Press
the
[DISPI-AY]
Button fol]owed
by the
STATUS
Button
(Key
111)
to identify the
zones in
trouble
(while
dis-
armed)
r Directory.
To scroll through a
list of
aII
prograuned
zone descriptions,
press
the
[DISPLAYJ
Button, then
the DIRECTORY
Button
(Key
1211.
To re-
turn to
the system,
press
the
IRESET]
Button at
any time.
o
Zones
hpassed.
Press the
IDISPLAY]
Button
then the BYPASSED
Button
(Key
t3l)
to list zones
that
have been deactivated.
STATTJS
DIRECTORY
B\PASSED
(KE'YPAD
COVER LOffiED)
Clith the keypad
cover raised, the
[DISPLAY]
Button
will
provide
a
visual
indication
of
the following conditions:
o Status. To display
the condition of the Fire
Zone
[if
installed)
after
the display
and sounder indications
have
been
reset,
press
the
IDISPLAYI
Button,
then the FIRE STATUS Button
(Key
t1l).
r SYstem
Troub1es.
Pressing the
TDISPLAYI
Button
followed
by the
SYSTEII
TROUBLE Button
(Key
121)
will
display
system
problems
(LObl
BATTERY, AC
POtlER LOSS,
etc.
).
o Alarn History.
Alarm conditions
occurring
during
the last four
arm/disarm
intervals are
retained in memory. Alarm
History
*1.
ahrays
contains
the
most
recent
interval, Alarm History
*2
the next, etc.
Press the
TDISPLAYI
Button,
then
the
AI-ARI{ HIST0RY Button
(Key
t3l).
F IRE SYSTE}4
ALART,I
STATIJS
TROI.BLE
HISTORY
t1

NAPCO Magnum Alert 2600 Specifications

General

Brand	NAPCO
Model	Magnum Alert 2600
Category	Control Panel
Language	English