EasyManua.ls Logo

Napoleon Altitude AX36NTE-1 - User Manual

Napoleon Altitude AX36NTE-1
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FRENCH
PG. 63
W415-3150 /
B / 03.15.23
ADD MANUAL TITLE
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030
Phone 1 (866) 820-8686 • www.napoleon.com • hearth@napoleon.com
CERTIFIED TO THE CANADIAN AND AMERICAN NATIONAL STANDARDS:
CSA 2.22 AND ANSI Z21.50 FOR VENTED DECORATIVE GAS APPLIANCES
INSTALLER:
Leave this manual with the appliance
CONSUMER:
Retain this manual for future reference
ADD PRODUCT CODE HERE (TRADE GOTHIC LT STD FONT)
NATURAL GAS MODELS:
PROPANE GAS MODELS:
Product Name / Code
(MUST use title from Price Book)
ADD ____ ILLUSTRATED
ADD PRODUCT IMAGE
CSA /
INTERTEK
LOGO
SAFETY INFORMATION
- Do not store or use gasoline or other
ammable vapors and liquids in the vicinity of
this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not
use any phone in your building.
Immediately call your gas supplier from a
neighbour’s phone. Follow the gas
supplier’s instructions.
If you cannot reach your gas supplier, call
the fi re department.
- Installation and service must be
performed by a qualifi ed installer, service
agency, or the supplier.
This appliance may be installed in an aftermarket,
permanently located, manufactured home (USA
only) or mobile home, where not prohibited by
local codes.
This appliance is only for use with the type of gas
indicated on the rating plate. This appliance is
not convertible for use with other gases, unless
a certifi ed kit is used.
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
WARNING
!
ENGLISH
$10.00
FOR INDOOR USE ONLY
IF INSTALLATION + OPERATION, ADD SERIAL
NUMBER LABEL HERE
IF SEPARATE MANUALS, ADD “PLACE
BARCODE LABEL ON THE OWNER’S MANUAL”
AX36PTE-1 / AX42PTE-1
Altitude™ X Series
(AX36-1 illustrated)
INSTALLATION MANUAL
AX36NTE-1 / AX42NTE-1
PLACE SERIAL NUMBER LABEL
ON THE OWNER’S MANUAL
Safety Barrier

Table of Contents

Questions and Answers

Summary

Safety Information and Warnings

General Appliance Information

1.1 Rates and Specifications

Provides technical specifications and performance data for the appliance models.

1.2 Installation Checklist

A checklist for installers to verify all installation steps and requirements have been met.

1.3 Installation Overview

Outlines the recommended sequence of steps for installing the appliance.

1.4 Rating Plate Information

Explains how to read and understand the appliance's rating plate details.

1.5 Mobile Home Installation

Specific instructions and requirements for installing the appliance in mobile homes.

1.6 Hardware List

Lists and illustrates the hardware components included with the appliance for installation.

1.7 Dimensions

Provides detailed dimensional drawings for both AX36-1 and AX42-1 models.

1.8 Optional Heat Management System

Explains the features and benefits of the optional heat management system.

Venting System Requirements

2.1 Typical Venting Installation

Illustrates and explains standard venting installation procedures and clearances.

2.2 Minimum Air Terminal Location Clearances

Details required clearances for vent terminal placement based on location and standards.

2.3 All Terminations

Provides guidelines for various vent termination configurations and limits.

Rough Framing and Clearances

3.1 Nailing Tab Installation

Instructions for securing nailing tab brackets to the appliance using supplied screws.

3.2 Standoff Assembly

Details on installing the standoff assembly for proper header clearance and stability.

3.3 Finish Floor Consideration

Guidance on preparing the floor, including using a raised platform for finished flooring.

3.4 Minimum Framing Dimensions

Specifies required framing dimensions for both AX36-1 and AX42-1 models.

3.5 Minimum Clearance to Combustible Enclosures

Outlines minimum clearances between the appliance enclosure and combustible materials.

Venting Installation Procedures

4.1 Horizontal Installation

Step-by-step guide for installing the venting system through an exterior wall.

4.2 Vertical Installation

Instructions for installing the venting system through a roof.

4.3 Using Either Flexible Vent Components

Guidelines for using flexible vent pipes, including support and sealing.

4.3.1 Horizontal Air Terminal Installation

Specifics on installing the air terminal for horizontal vent runs.

4.3.2 Vertical Air Terminal Installation

Specifics on installing the air terminal for vertical vent runs through a roof.

4.3.3 Appliance Vent Connection

Details on connecting the vent pipes to the appliance itself.

4.3.4 Restricting Vents

Instructions on how to install a restrictor plate to modify flame appearance.

Electrical System Information

5.1 Hard Wiring Connection

Requirements and standards for hard-wiring the appliance.

5.2 Receptacle Wiring Diagram

Diagram illustrating the wiring for the appliance's electrical receptacle.

5.3 Electronic Wiring Diagram

Diagram showing the appliance's internal electronic wiring connections.

5.4 eFIRE Controller Application

Information on using the Napoleon eFIRE app for fireplace control.

5.5 Initializing the Transmitter; Battery Holder for the First Time

Step-by-step guide to synchronize the remote transmitter with the appliance.

5.6 Wiring Diagram

A detailed wiring diagram for the appliance's electrical system.

Gas Supply Installation

Appliance Operation

Lighting Instructions

Detailed steps for safely lighting the appliance's pilot and main burner.

To Turn Off Gas

Procedures for safely shutting off the gas supply to the appliance.

7.1 Pilot-On-Demand

Explains the appliance's intermittent and continuous pilot ignition modes.

Finish Framing and Aesthetics

8.1 Flush

Instructions for flush installation, including framing and clearances.

8.2 Recessed

Instructions for recessed installation, including framing and clearances.

Finishing the Appliance

9.1 Decorative Panels

Information on optional decorative panels that may be required for finishing.

9.2 AX36-1 Log Placement

Diagrams and instructions for correctly positioning the logs for the AX36-1 model.

9.3 AX42-1 Log Placement

Diagrams and instructions for correctly positioning the logs for the AX42-1 model.

9.4 Safety Barrier, Glass Door and Door Trims Removal; Installation

Procedures for removing and installing the safety barrier, glass door, and trims.

9.5 Installing Non-Combustible Board

Guidance on installing non-combustible panels and materials for finishing.

9.6 Finishing Flange Adjustment

Instructions on how to adjust the finishing flange based on material thickness.

9.7 Non-Combustible Facing Material

Details on clearances and projection limits for non-combustible facing materials.

9.8 Minimum Combustible Mantel Clearances

Provides graphs and tables for determining mantel clearance requirements.

9.9 Clearances Around Appliance (TV and Valuable Objects)

Recommended clearances for placing electronic devices near the appliance.

9.10 Logo Placement

Instructions for placing the appliance logo.

9.11 Glowing Embers

Guidance on positioning glowing embers for optimal effect and avoiding burner blockage.

9.12 Charcoal Embers

Instructions for placing charcoal embers, avoiding burner port blockage.

9.13 Air Shutter Adjustment

How to adjust the air shutter for flame appearance and performance.

9.14 Pilot Burner Adjustment

Procedures for adjusting the pilot burner for correct flame size and pressure.

9.15 Flame Characteristics

Visual guide to compare and identify normal flame characteristics.

Appliance Maintenance and Care

10.1 Care of Glass

Instructions on how to clean the appliance's glass safely and effectively.

10.2 Annual Maintenance

Recommended annual maintenance tasks to be performed by a qualified technician.

10.3 Glass; Door Replacement

Procedures for replacing the glass or door assembly of the appliance.

10.4 Night Light Replacement

Steps for replacing the appliance's night light bulb or lens.

10.5 Blower Replacement

Instructions for safely replacing the appliance's blower assembly.

Replacement Parts Identification

11.1 AX36-1 Overview

Lists and illustrates all replacement parts for the AX36-1 model.

11.2 AX36-1 Valve Train Assembly

Detailed breakdown and part numbers for the AX36-1 valve train assembly.

11.3 AX36-1 Logs

Identifies and lists the part numbers for the AX36-1 log sets.

11.4 AX42-1 Overview

Lists and illustrates all replacement parts for the AX42-1 model.

11.5 AX42-1 Valve Train Assembly

Detailed breakdown and part numbers for the AX42-1 valve train assembly.

11.6 AX42-1 Logs

Identifies and lists the part numbers for the AX42-1 log sets.

Troubleshooting Common Issues

Product Warranty Information

Napoleon Altitude AX36NTE-1 Specifications

General IconGeneral
Fuel TypeNatural Gas or Propane
Vent TypeDirect Vent
Ignition SystemElectronic Ignition
TypeGas Fireplace
Viewing Area36"
Glass Size36"
VentingDirect Vent
Log Set MaterialCeramic

Related product manuals