EasyManua.ls Logo

Napoleon GD3200-N User Manual

Napoleon GD3200-N
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WS-415-53 / 04.08.99
GAS-FIRED WALL FURNACE
DIRECT VENT MILLIVOLT SYSTEM
INSTALLATION AND OPERATION INSTRUCTIONS FOR:
NATURAL GAS MODEL
GD3200-N / GD3200B-N
PROPANE GAS MODEL
GD3200-P / GD3200B-P
CERTIFIED FOR CANADA AND UNITED STATES USING ANSI / AGA / CGA METHODS
INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS,
CSA 2.33 AND ANSI Z21.88 RESPECTIVELY FOR GAS-FIRED VENTED GAS FIRED SPACE HEATING APPLIANCE
Fax: (705)722-6031 Email: ask@napoleon.on.ca
Web: www.napoleon.on.ca
Wolf Steel Ltd., RR#1, 9 Napoleon Rd.,
Barrie, ON., Canada L4M 4Y8 (705)721-1212
R-2000
WARNING: If the information in these instructions is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapours and liquids in the vicinity of
this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier,
call the fire department.
Installation and service must be performed by a qualified installer, service agency
or the gas supplier.
f i r e - p a r t s . c o m

Questions and Answers:

Napoleon GD3200-N Specifications

General IconGeneral
Vent TypeDirect Vent
Ignition TypeElectronic Ignition
Log Set MaterialCeramic Fiber
Burner MaterialStainless Steel
TypeGas Fireplace
Fuel TypeNatural Gas
EfficiencyUp to 70%
Control TypeRemote Control

Summary

Product Identification and Safety Precautions

Installer Instructions and Warnings

Key instructions for installers and critical warnings about potential fire or explosion hazards.

Safety Guidelines and Gas Leak Procedures

Essential safety advice and clear steps to follow if a gas leak is detected.

Napoleon Gas Fireplace Warranty Information

President's Lifetime Limited Warranty

Details the components covered under the lifetime warranty, including combustion chamber and burner.

Warranty Conditions and Limitations

Outlines the terms, conditions, exclusions, and limitations of the fireplace warranty.

General Installation and Safety Instructions

Installation Requirements and Codes

Specifies installer qualifications, code compliance, gas line procedures, and pressure testing.

Fireplace Safety Warnings

Critical warnings covering high temperatures, usage restrictions, water damage, and modifications.

Installation and Venting Guidance

General Information and Care

Covers fireplace specifications, clearances, mobile home suitability, and care for glass/plated parts.

Venting Requirements and Air Terminals

Details venting rules, lengths, air terminal locations, and necessary clearances for safe operation.

Venting Installation Examples

Provides specific examples and calculations for horizontal and vertical venting configurations.

Air Terminal Installation Clearances

Canadian and U.S. Clearance Requirements

Table detailing required clearances for air terminals based on Canadian and U.S. standards.

Clearance Notes and Symbols

Explanations for clearance notations, symbols, and specific installation notes.

Wall and Ceiling Protection Installation

Horizontal Wall Penetration

Instructions for framing, shielding, and firestopping when venting through an exterior wall.

Vertical Roof Penetration

Steps for framing, shielding, and firestopping when venting through a roof.

Flexible Vent Component Installation

Horizontal Air Terminal Setup

Guide for connecting flexible vent liners through a wall to the air terminal.

Vertical Venting and Fireplace Connection

Vertical Vent Installation Steps

Procedures for installing the vent terminal through a roof, including flashing and sealing.

Fireplace Vent Liner Connections

Instructions for connecting the flexible vent liners to the fireplace unit.

Rigid Vent Component Installation

Horizontal Rigid Vent Terminal

Steps for installing rigid vent components for horizontal wall exit.

Vertical Rigid Vent Terminal

Steps for installing rigid vent components for vertical roof exit.

Gas Line and Electrical Installation

Gas Line and Control Wiring

Instructions for routing gas lines and connecting millivolt wiring for controls and safety.

Mobile Home Securing

Specific guidance on how to securely fasten the fireplace for mobile home installations.

Fireplace Framing and Clearance

Framing for Flush Installation

Guidance on framing the fireplace opening and securing it flush with the finished wall.

Mantle Clearance Guidelines

Information and a graph to determine required clearances for combustible mantles.

Finishing Touches: Logs and Embers

PHAZER™ Log and Ember Placement

Instructions for correctly positioning logs and charcoal embers for optimal visual effect.

Door, Louvres, and Trim Installation

GD3200 Door and Trim Assembly

Steps for removing and installing the door, trim, and louvres for the GD3200 model.

GD3200B Door, Trim, and Louvres

Steps for removing and installing the door, trim, and louvres for the GD3200B model.

Optional Blower Installation

Blower Component Installation Steps

Detailed instructions for electrically connecting and physically installing the optional blower unit.

Optional Fan and Sensor Control

Fan Installation and Wiring

Steps for installing the optional fan and connecting its wiring harness and power.

Thermostatic Sensor Control Setup

Instructions for installing and connecting the thermostatic sensor control for the fan.

Operation and Lighting

Operating Instructions and Safety

Guidance on initial operation, odors, gas safety checks, and general operating precautions.

Pilot and Main Burner Lighting

Step-by-step instructions for safely lighting the pilot and main burner of the fireplace.

Gas Shut-Down Procedures

Procedures for performing complete or temporary shutdowns of the gas supply.

Maintenance and Adjustments

Routine Fireplace Maintenance

Covers cleaning, inspections, and checks for burner, pilot, and seals to ensure proper function.

Pilot Burner Flame Adjustment

Instructions on adjusting the pilot screw to achieve the correct pilot flame size.

Venturi Air Shutter Adjustment

Guidance on adjusting air shutters for optimal flame color and preventing carboning.

Replacement Parts and Ordering

How to Order Replacement Parts

Information required when ordering replacement parts, including model and part numbers.

Available Replacement Part Numbers

Lists of part numbers for specific components of the GD3200B, GD3200, and vent kits.

Troubleshooting Common Issues

Burner Flame and Carboning Problems

Diagnosing and resolving issues with burner flame appearance and carbon deposits.

Gas Smell and Pilot Light Issues

Troubleshooting procedures for gas leaks, pilot outages, and thermocouple problems.

Troubleshooting Advanced Issues

Burner Ignition and Control Problems

Addressing problems with burner ignition, wall switches, thermostats, and faulty valves.

Ventilation and System Control Issues

Resolving issues related to vent blockages, re-circulation, and remote control malfunctions.

Related product manuals