N
Nancy CampbellSep 6, 2025
How to remove paint from the pilot of my Napoleon Indoor Fireplace?
- TtammystewartSep 6, 2025
If the pilot has been painted, use a scrub pad to remove the paint from the pilot hood, ignitor, and flame sensor.
To Next PageTo Next PageHow to remove paint from the pilot of my Napoleon Indoor Fireplace?
If the pilot has been painted, use a scrub pad to remove the paint from the pilot hood, ignitor, and flame sensor.
How to fix a short or loose connection in the sensor rod of my Napoleon IR3GN Indoor Fireplace?
To address a short or loose connection in the sensor rod, verify all connections are secure. Ensure the connections from the pilot assembly are tight and not grounding out to any metal.
How to check for loose connections on my Napoleon Indoor Fireplace?
To check for loose connections, verify there are no loose connections or electrical shorts in the wiring, and that nothing is grounded out to any metal object.
What position should the receiver switch be in on my Napoleon IR3GN Indoor Fireplace?
Ensure that the 3-position switch on the receiver is in the 'REMOTE' position (middle).
What position should the control module switch be in on my Napoleon IR3GN Indoor Fireplace?
Verify the ON/OFF switch is in the 'I' position, which denotes on.
How to check the wiring on my Napoleon IR3GN?
To check the wiring, verify that the wire for the sensor and the wire for the ignitor are connected to the correct terminals (not reversed) on the module and pilot assembly.
General| Brand | Napoleon |
|---|---|
| Model | IR3GN |
| Category | Indoor Fireplace |
| Language | English |
