Napoleon Vector Series User Manual

FRENCH
PG. 41
W415-2036 / D / 08.05.21
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbour’s phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency, or the supplier.
WARNING
!
ENGLISH
For indoor use only
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious injury, death, or property damage.
OWNER’S MANUAL
Vector / Luxuria Series
SAFETY INFORMATION
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030
Phone 1 (866) 820-8686 • www.napoleonfireplaces.com • hearth@napoleonproducts.com
Luxuria model illustrated.

Napoleon Vector Series Specifications

General

Vent Type	Direct Vent
Burner Material	Stainless Steel
Weight	Varies by model
Model	Vector Series
Fuel Type	Natural Gas or Propane
Viewing Area	Varies by model
Glass Type	Ceramic
Ignition System	Electronic Ignition
Dimensions	Varies by model
Warranty	Limited Lifetime Warranty
Remote Control	Standard (eFIRE remote)

Summary

Critical Safety Information

Fire and Explosion Hazard Warnings

Essential warnings concerning fire and explosion risks during operation.

Gas Leak Response Procedures

Step-by-step instructions for immediate actions if gas is detected.

Clearance and Hot Surface Safety

Guidelines on safe clearances and hazards from hot appliance surfaces.

Appliance Identification and Basic Setup

Welcome and Model Information

Congratulates the user and provides space for dealer and appliance identification.

Appliance Overview and Components

Identifies key components and explains the manual's scope.

Rating Plate and Lighting Instructions

Location of the rating plate and lighting instructions for reference.

Appliance Operation

Starting and Stopping the Appliance

Step-by-step guide to turning the appliance on and off.

Electronic Lighting Procedures

Detailed instructions for lighting the appliance using the electronic ignition.

Pilot Ignition Modes Explained

Explains the Continuous Pilot Ignition (CPI) and Intermittent Pilot Ignition (IPI) modes.

Battery Maintenance

How to change batteries in the remote and battery holder.

Remote Control Functions

Covers remote layout, temperature, flame height, child proofing, and LED controls.

Appliance Maintenance and Cleaning

Installation Clearances and DHC System

Guidelines for safe installation clearances and the Dynamic Heat Control system.

General Maintenance Guidelines

Covers routine cleaning, inspection, and safety checks for the appliance.

Cleaning Glass and Plated Components

Specific instructions for cleaning the glass and plated parts of the fireplace.

Component Removal Procedures

Steps for removing safety barriers, door trim, and glass doors.

Troubleshooting, Parts, and Warranty

Replacement Parts Information

How to identify and order replacement parts for the appliance.

Troubleshooting Common Issues

A guide to diagnosing and resolving common appliance problems.

Frequently Asked Questions (FAQ)

Answers to common queries about the fireplace's operation and maintenance.

Warranty and Service History

Details the product warranty and provides a log for service history.