To Next PageTo Next PageWhy are the flames lifting away from the burner on my Napoleon N415-0158?
If the flames are lifting away from the burner on your Napoleon Grill, accompanied by the smell of gas, and possibly difficulties in lighting, it is likely due to improper air shutter adjustment. Close the air shutter slightly according to the combustion air adjustment instructions. This adjustment must be done by a qualified gas installer.
Why won't the burners on my Napoleon N415-0158 Grill cross light each other?
If the burners on your Napoleon Grill will not cross light each other, it is likely due to plugged ports at the back of the burner. Clean the burner ports, following the burner maintenance instructions.
Why is "paint" peeling inside the lid of my Napoleon Grill?
If it appears that "paint" is peeling inside the lid or hood of your Napoleon Grill, don't worry, this is not a defect. The finish on the lid and hood is stainless steel, and will not peel. The peeling is caused by hardened grease, which dries into paint-like shards, that will flake off. Regular cleaning will prevent this.
How to fix low heat/low flame on Napoleon Grill?
Low heat or low flame on your Napoleon Grill, even when the valve is turned to high, can be due to a few reasons. If you're using propane, it might be an improper lighting procedure. For natural gas, the supply line might be undersized. For both types of gas, improper preheating could be the cause. Here’s how to troubleshoot: * Ensure you're following the lighting procedure carefully, with all gas grill valves in the off position when the tank valve is turned on. Turn the tank on slowly to allow pressure to equalize. * Make sure the pipe is sized according to the installation code. * Preheat the grill with both main burners on high for 10 to 15 minutes.
What to do if Napoleon Grill burners burn with yellow flame and smell of gas?
General